Here is a story behind the success .

Laras journey Susanti studied at the Faculty of Law may not be as smooth as Donna. The barrel was then living with his uncle in Jakarta have to mortgage the house prior to obtaining a loan of money from the bank after being accepted in UGM.

Student born in Tegal, July 27, 1988, it does live with his uncle because his parents divorced. Before entering the Faculty of Law at the time, his mother suggested that work after high school graduation. However, luckily his uncle was not agreed and suggested the barrel for college.

“It was pakde said if the provision that would later study there,” recalls the barrel.

The barrel on the law of love of science has been planted since high school. Law enforcement in Indonesia is selective and not just make it intrigued to know more about what is actually going on with our laws that time. This is confirmed again by his personal experience when taking care of completeness letter that should receive scholarships ranging from extortion to police villages.

For this reason, as stated in the FH UGM is received, the barrel is not to waste the opportunity.

The key to success? “Time management, diligently reading the news, and often discussed,” he said. “But of those three things, which is more important is the love of science that we field,” said the student who won a national debate on the Constitutional Court in 2011.

Educational experience of disadvantaged parents seem to be of encouragement to the barrel to not waste the time of his studies at the FH. Understandably, his father only finished junior high school, while her mother did not complete primary school.

In addition to lectures, the barrel is active in several organizations. He is the Head of the Department of Strategic Studies of the Faculty of Law Student Council Justicia, Minister for Strategic Studies BEM UGM KM (2010), and research trawl FH UGM.

Do not give up with poor family conditions, the barrel is diligently looking for scholarships during the study. The results were not in vain. She earned several scholarships that provide tuition assistance to pocket money.

Similarly, Donna, with a GPA of 4.00 is obtained does not necessarily make it complacent. In fact, he was ready to find a scholarship to continue studies of S-2. Became a lecturer in the Faculty of Law has become her mind.

“From the Faculty of Law is born of the law enforcement community that their work widely anticipated,” said the author of the Learning Care Indonesia.

Scholarship application will only be selecting six students Indonesia was opened since February 20, 2012 to 30 April 2012. The students who pass the selection will be studying at TiasNimbas Business School, Nyenrode Business Universiteit, and Amsterdam Business School.

Mervin Bakker, director of Nuffic Neso Indonesia explained that the program “Orange Tulip Scholarship 2012″ This was the first launched in Indonesia. Previously, this scholarship program was first held in China, Taiwan, South Korea, and Mexico.

“This will be our springboard to expand this program in the future and open up investment opportunities for Indonesian companies participated in this program starting next year,” said Mervin at a media gathering in Jakarta, Thursday (02/16/2012) afternoon.

The scholarship funding is the result of cooperation between Air France-KLM and the three school business education providers. The total value assigned by the sponsor has reached € 85,250, plus a KLM ticket is equivalent to the value of € 2,000. So, if it is Rp 12,000 per EUR, total scholarships worth Rp1.047.000.000.

Marvin revealed, it opens opportunities for other agencies who want to help this scholarship program.

Implementation of Culture I was part of the application of The Leader in Me program, after the previous Vision Training Day and The 7 Habits of Highly Effective Educators by Dunamis Foundation. Director of Dunamis Foundation Andiral Purnomo said, The Leader in Me is a program to build students’ character through character development early on educational leadership with the establishment of the school culture.

The implementation process begins with the formation of culture in school leadership that includes three stages, namely Vision Day, The 7 Habits Training of Highly Effective Educators and Cultural Implementation Training Level 1. The second phase in the implementation phase is the application of assistive devices for the application of culture in school leadership training and supported by Cultural Level 2 implementation. Meanwhile, the third phase of implementation is to maximize the results from the application of cultural leadership.

“The purpose of the implementation of cultural training level 1 is to prepare teachers and school management to implement a culture of leadership in SDSN 12 Benhil,” added Andiral.

Implementation of cultural training level 1 The Leader in Me in SDSN 12 Benhil directly facilitated by Andiral and discuss about the six pillars supporting the application of The Leader in Me that uses a holistic approach including the provision of example (modeling), which supports the school environment (environment: see, hear -sense), teaching materials (curriculum), the way the (instruction), to the system (systems), and the leadership tradition (traditions) that are aligned with the vision and mission of the school concerned.

The Leader in Me program using a holistic approach (whole-school approach). This approach not only provides the opportunity for students, but also to teachers, school management to the parents to have a universal character of leadership through the 7 Habits principles. The Leader in Me program itself adapted from the principles of The 7 Habits of Highly Effective People work DR. Stephen R. Covey has adjusted its application to the school environment.

The students SDSN 12 Benhil also expected to learn how to apply the 7 Habits in their daily activities, both in lessons and daily behavior. Programs provided to students through the transfer of knowledge from educators, both through the curriculum teaching materials, as well as by example all teachers and school components, to the leadership practices within and outside the classroom.

The Coordinator of Program Development Expertise Automotive Light Vehicle SMKN 1 Edi Susianto Cirebon, the idea of ​​assembling cars have actually been there four years ago. However, the idea that consideration of the target market is constrained to be targeted.

Finally, new ideas come true this year after SMKN 1 Cirebon determined target sights. The reason is simple, as it will only be used at tourist sites, mini jeeps do not need a license like any other vehicle operated on public roads.

Working closely with the company Viar Motor Indonesia, Edi sure students are capable of mass producing touring car.

When building a prototype touring car, the frame is made of students. As for the body, engine and axle supplied by industry partners. “Making it easier for wearing the framework of ordinary welding. Stay linked. Expected long we can make your own all the parts, “said Edi.

Although motor-engine, the car was put on tour with the construction of a car axle seal on the axle so it is more secure and stable. With a cylinder capacity of 150 cc and fuel tank capacity of 12.5 liters, the use of fuel-efficient, which is 1:20.

Specification used is of type 4 stroke OHC engine, water cooler (radiator) single vertical cylinder, 5 speed transmission gears, and battery-powered 12 volt 9 Ah. Although small, this car is strong and can travel at 60 kilometers per hour.

Before the market, said Bambang Widjaja Vinsentius of Viar Motor Indonesia, each unit must undergo a quality test of the industry. For now, the touring car prototype is still undergoing refinement process on the steering wheel and suspension to be more comfortable. “We do not want to take home because it carries the name Viar,” he said.

To make and assemble the frame, only the class XI student of automotive skills program involved. A team of 20 students who worked on the car in turn so that all get a chance.

“Class XII did not participate because it was a solid test preparation activities. The class X is still learning the theory, “said Chief SMKN 1 Cirebon Sutadi.

The plan, touring car will be marketed at a price of Rp 40 million and Rp 50 million. Students will get the money from selling it, but have not determined the amount.

After touring car, the school is located at Jalan Struggle, Cirebon, and was founded in 1955, plans to create a pedicab tours and mini fire engine that can reach up to the alleyways in densely populated settlements.

Going forward, the program will develop the skills of automotive repair and auto body painting. “We do not make what other people think. The hope, we will be able to make their own all the cars in order to independently make their own cars, “said Edi.

Twinkle Esemka

In addition to touring car, since the two-year program students of electronics expertise to assemble LCD TVs sized 42 inches and 32 inches labeled “twinkle Esemka”.

To date the students assemble over 200 units. Many LCD TVs have been sold to teachers and principals in other schools as well as local officials, like Mayor Cirebon Subardi. Currently the remaining 26 units with a size 42 inch and 32 inch sizes 3 units unsold. To promote the work of students, schools often follow the exhibition, both locally and nationally. However, sales of LCD vocational students were not as fast as the industry. There are difficulties to compete with other products, especially in terms of competitive prices.

“Pricing depends on the prices of components purchased from industry colleagues from China. Schools join the industry because the price can not be ordered alone. If you want to import, must be at least 1,000 units. We were not able to import and unable to make its own components as an expensive investment, “said Sutadi.

Chairman of the Entrepreneurial Support Raswa Creative Industries, said assembly twinkle Esemka done with the guidance of students in grade XI XII class students who have experienced assemble. One unit is assembled of four students can be completed within one hour. Are judged not quantity, says Raswa, but the attitude of the students at work, namely the ability to work together, the identification of components, and precision. “Most students difficulty in troubleshooting section, it is assembled, but can not be turned on. Usually due to mounting socket upside down, “said Raswa.

The results of the student assembly should be marketed by students as part of subjects of entrepreneurship education. “Students should know the components, assemble, to market. Sale proceeds to buy another component to the learning process continues. Students can return from the sale. Each of the units sold, students can Rp 100,000, “said Sutadi.

Size 42-inch LCD TV sells for Rp 4.8 million and measures 32 inches USD 2.9 million with a warranty of 2 years of PT twinkle. LCD TV twinkle Esemka has advantages such as light weight, low power consumption, file format mp3, jpeg, wma7, wma8, aac, ac3, bmp, mpeg, and which can be run via USB.

In addition to LCD TV, in early January the students also assemble dishes for Rp 1 million. Schools with student numbers 1695 people in seven programs were also skill to assemble LCD projector and 371 A Note netbook Esemka (2010-2011) as well as making hand tractors. Since 10 years ago, they have made more than 20 waste-powered chopper engines 1.5 OD, 900 watt capacity of 50 kilograms per hour, is sold at Rp 4.5 million and Rp 8.5 million.

Although it has been assembling a variety of products and the majority of students booked foreign companies, Sutadi still not satisfied. According to him, SMK should not only provide ready-made workforce for the company. Vocational students are also expected to find new innovations are needed by the community.

1. Include the abstract and key words in English;
2. Using the methodology and procedures for appropriate scientific writing.

Do not forget to use the reference of the international journal writing, in-review by experts, and has at least risen for three consecutive years.

A legitimate scientific work using the book as a reference text. However, it would be better if a scientific paper using the reference of many journals. In addition to the actual, the journal also presents a broader view of science.

Reference is preferably of the journal. Of the book is okay, but its value will go down

Journal and ISSN registration

To register and obtain an ISSN journals, research institutes or universities must pass through several processes, namely:

1. A letter written request that the periodical publishers;
2. Carrying two copies of its first publication, or two copies of the front cover page if the journal has not published;
3. Enclose two copies of page table of contents;
4. Enclose two copies of the editorial board of the page;
5. Attach a complete bibliographic data that includes information about the frequency of publication, the first year of publication, the language used, and so forth.

ISSN is a code that is used internationally for periodicals, and is given by the International Serial Data System (ISDS) is based in Paris, France. By getting ISSN, will make it easier to identify some of the publications that have the same name as the ISSN are given only to one periodical titles. ISSN also simplifies the administration in terms of ordering periodicals. Because, quite simply ordering ISSN mention of that periodical.

For the scientific journal published  ISSN is one of the conditions to be met.

Embassy in Bern Renata Siagian a counselor in a press release in London, England, Thursday (02/02/2012), said the three students who passed the dual major is designed to have a higher difficulty level than the other programs. To be followed, the students must have a certain minimum value and above average.

As a graduate of HIM, Nastita Arydayita Rani, and his colleagues hope to obtain suitable employment field. By becoming alumni him, they will become part of an established network of alumni HIM career in more than 50 thousand leading hotel chains worldwide.

“This will help the development of our future career,” said Rani Arydayita Nastita.

As to date him known as one of the top hospitality schools in the tourist area of ​​Montreux, Switzerland. Many Indonesian students studying in this prestigious university. In addition to the quality of education quality, the campus is also a strategic location in the heart of Montreux, and has an international accreditation for its appeal in the eyes of international students.

Renovating your house or doing some wall repair involves the manipulation of electrical fixtures. This is a daunting and risky task. To avoid compromising safety, leave the job to a professional electrician. He is trained both in disassembling and reinstalling the wiring system to effectively conform to the new structural configuration.

Before beginning your search for an electrician, carefully evaluate what work needs to be done. Widening a room usually involves breaking through the walls and moving some electrical outlets. Review your contract with the remodeling company and check whether rewiring and other electrical services are included. If not, search online or ask for recommendations from friends and family for a good electrician

Think long-term. Make a realistic expansion outline that contains details of the equipment and electronic devices you plan to buy in the future.

These will definitely affect the new wiring system design. Several electricians in areas like the Twin Cities only start working when future renovation plans are laid out clearly. This enables them to properly plot out the locations of the wires and outlets.

Choose a Twin Cities electrician or another professional elsewhere based on the skill requirement of the installations involved. You will surely encounter many names; narrow the number to three based on their educational and professional background. Set an appointment with each of them so you can more thoroughly assess their competence. One important thing you have to make sure of is insurance coverage. Cross out uninsured services from your list.

Reviews offer essential information that can influence your choice.

Look for independent websites providing reviews of the services of your prospects. If possible, contact previous clients and ask how effective each Twin Cities electrician was. Finally, take a look at their rates and factor those in with the rest of the considerations.

Meet the Twin Cities electrician you have chosen to discuss the terms and conditions of the job. Create a contract clearly specifying the cost, payment schedule and method, and starting and estimated completion dates.  To make it legal, have it authorized by a construction industry regulator or another licensed individual with the power to activate contracts.

Welding is the process of heating and melting to conjoin metal parts. Welding is an important aspect of the steel, automotive, and construction industries. Anyone who wants to pursue a career in welding should figure out the time, finances, and career aspirations they have. They are able to choose between a certificate program that includes four or five courses, a diploma or associate degree that requires two years of specialized training, or a bachelor’s program that requires four years of a comprehensive education. Many welding programs are available throughout the U.S. and teach specialized training programs for workers in certain areas.

Types of Welding Careers

Before deciding on a school, prospective welders should find out which type of welding they want to pursue. Various types of welding may come up for consideration such as underwater and plastics welding in addition to various types of metal welding.

Welding is a mainly physical job so those interested in this career should learn everything they can about it so they can be able to handle the responsibilities.

Welding Schools and Programs

There are various welding programs provided in a Nebraska welding school such as combination welding and welding technology. The right Nebraska welding school and city can be researched online. In many states, some cities have more jobs than others so it is important that potential students should consider school location. Even so, this should be one of the last factors because some welding schools and programs are better than others, but are not local. People should choose a school that carries the program they want, and runs like a regular learning institution, preferably with financial aid. Looking up the certifications is also important because some certifications are required in a certain area.

Welding Inspector Courses

A variety of Oklahoma welding inspector courses are available for people interested in this career. Certified welding inspectors that complete these courses are trained to ensure public safety. They ensure that the work of other welders meet necessary standards and specifications. Certain organizations provide a range of certifications for professional inspectors. Before taking Oklahoma welding inspector courses, interested people should take high school welding classes. Also, welders are able to complete an associate’s or bachelor’s program in welding technology prior to working as inspectors.

Welding is a highly useful occupation that is used in many manufacturing industries throughout the country. Many kinds of welding are available for consideration and interested people should find a school that suits their career and educational goals.

But so far the only hospital included in this program is the 35 bed Ulysses hospital. 12 of the 26 nurses working there have thought to give it a try. Many nurses, who have already been to the medical center work for 3-4 days in eight to twelve hour shifts.

A nurse, who’s been working in Ulysses for the past 5 years, was quite thrilled with the program. In Kansas City, she usually handled patients with cases of bone marrow, liver and kidney as part of the hematology unit assigned to her. The medical center’s outreach plane during its scheduled stops to western Kansas transports the nurses to Kansas City where they are housed at the medical center.

According to the administrator of the Ulysses hospital, the program has much potential for nursing staff in the surrounding areas. It’s the opportunity to experience nursing practice at a tertiary care level and work with state-of-the-art equipment.

He said that their entire nursing staff will have access to that knowledge through nurses who participate, and will be more in tuned with state of the art care which improves patient care. That’s a tremendous advantage. The director, nursing services also said that the program has a twofold purpose. It helps capable nurses in getting better experience and thus better jobs; and simultaneously takes care of the staff shortage at the center.

The nurses have well adapted to the medical center. She said that they provide some instruction, but they are good practitioners and good workers. The staff is also glad to work with such people. It’s the 7 passenger outreach planes, which takes the doctors for educational seminars, which have made this program possible.

To find part time work, the nurses usually drive into the Kansas City from Manhattan, Topeka, Paola and Fort Scott. At a time 2-3 nurses can catch a ride on the plane. A nurse who has been with Ulysses for the past three years says that the event needs a lot of planning in the future.

She had to put in much thought and planning into it; but is once again ready for it. The nurse pointed out that she has a lot of support from her daughters 8 and 14 years old respectively who want her to have the opportunity to enhance her skills. She hopes that they will soon reap the benefits of that education which they might be able to use back home efficiently.

Education is like a building block which is responsible to help us choose careers which interest us and also make us do things at which we are really good at. Most of us use it as a tool to move forward in life and make a good living. But then there are few who would like to live in this world of education. What should they do then? Should they stop dreaming of earning and choose to stay in this field without a single penny of income. Definitely not, they can jolly well choose a career in education. Professional education jobs are something that they should look for. There are many websites over the net which would give you an idea about the career path that should be chosen by you in order to do well in this field.

Academic careers online is one site where interested candidates can post their resume. There are many people who consider the job of teaching very interesting, they might have worked as an employer or employee for sometime but still they might find this field of education much more promising and enticing.

There are scopes for such people, there are specific sections where you will be asked to click and you can simply enter there and have yourself registered with them.

Kaplan professional education is also a well known name in the education industry that can be of real help to you. With their latest technology they can be a real source of good guidance to you actually. Its help is also taken by many people who are engaged in the finance or accounting industry. Any kind of study material that you may require can be provided by them. And apart from that there are quite a number of job opportunities present. If you get to visit their site then you can have a look at the kind of jobs that suits you as an academician. These organizations very often require the help of such people who can guide students with valuable advice in this field.

Becker professional education can be an answer to your search. They really pride themselves over the professional education jobs that they are capable of providing to their customers. So if you have the required knowledge and degree then they can really bring down your search to such a small number from where you may select quite easily. There are job options where the pressure would not be too high and you can jolly well continue with your work and at the same time work in this education industry.

There are options where you can choose to operate from home. They are active in many part of U.S.A and you can really land up finding a job in your favorite city or in your home town.

You can also choose to take a look at the site of council of education policy, research and improvement for more information. So no need to bite your fingers any more, you have quite a number of options when you are looking for jobs in education industry.